Horizontal/Vertical Bandsaw, Moving Handle, 200 ft/min, 1/2 hp Motor

Versatility and power when cutting in either a horizontal or vertical position
Heavy-duty 14-gauge steel stand
Blade drive is a sealed, steel, heat treated worm driving a bronze worm gear in an oil bath
Handle and wheels for easy movement
Ball bearing supported blade wheel
Fully adjustable ball bearing blade guides
Auto shut off after cut
Vertical work table
Assembly required

Quantity 1EA

Specifications

Amps [Nom]=9/4.5 - Full load amps; 10.1 - Starting amps; 4.9 - Running amps (no load)
Blade Length [Nom]=64 1/2 in
Blade Thickness [Nom]=0.025 in
Blade Width [Nom]=1/2 in
Control Type=Toggle on/off switch
Cutting Cap. 2=5 in (Round Stock at 90); 3 in (Round Stock at 45); 5 ¾ in x 5 in and 6 in x 2 in (Rectangular Stock at 90); 4 ½ in x 3 in (Rectangular Stock at 45)
Drive Gearing=Worm Gearing
Handle Type=Moving Handle (used to relocate machine and not during operation of machine)
Height [Nom]=41.34 in
Length [Nom]=37 in
Linear Speed [Max]=200 ft/min
Linear Speed [Min]=80 ft/min
Type=Horizontal/Vertical Bandsaw
Voltage Type=AC
Voltage [Nom]=115 V
Width [Nom]=17.72 in
Wt.=115 lb